Table of Contents
Advertisement
Storing Settings by Effect (User Quick Settings)
In addition to storing settings in the form of patches, you can also store settings for individual effects.
Since you can use such stored settings in other patches, just like with the Preset Quick Settings (p. 35), storing effects settings you
like ahead of time User Quick Settings is a convenient way to create new patches.
Effects That Can Be Stored
• COMP
• OD/DS
• PREAMP
• EQ
1.
The PATCH COPY screen appears.
The QUICK FX WRITE screen appears.
Select the effect settings you want to save.
3-020d
2.
The screen for specifying the destination to which to save the settings
appears.
Move the cursor to "Write to."
3.
4.
Select the save-destination for the settings.
5.
The settings are saved.
• FX-1/FX-2 Effects
• DELAY
• CHORUS
• REVERB
Chapter 3 Saving a Tone
• PEDAL FX WAH and Pedal Bend
• SEND/RETURN
• ASSIGN1–8
When edits have been made to the currently
selected patch, the PATCH WRITE screen is
displayed.
• To save ASSIGN 1-8 settings (p. 51), set the
SOURCE parameter to ASSIGN 1-8.
• For FX-1/FX-2, the settings in the currently
chosen effects set by FX select (p. 105) will be
saved.
• The effects shown below change with each
press of [MASTER/PEDAL FX].
- PEDAL WAH
- PEDAL BEND
- SEND/RETURN
- ASSIGN 1–8
When you want to change the User Quick Setting
name (12 characters), press [DISPLAY MODE]. For
information on how to enter characters, refer to
steps 4 through 6 of "Naming a Patch (PATCH
NAME)" (p. 42).
45
Advertisement
Table of Contents
