Od/Ds; (Overdrive/Distortion) - Boss GT-10B Owner's Manual

Parameter/ Explanation
Range
Xover f H (Crossover Frequency High) *3
2.50kHz– This sets the frequency dividing the high- and
10.0kHz ultra high-frequency ranges.
Drive *4
Adjusts the range (time) over which low-level
0–100 signals are boosted. Larger values will result in
longer sustain.
Tone
-50–+50 Adjusts the tone.
Level
0–100 Adjusts the volume.
*1 Setting available with Type set to BOSS Comp or D-Comp.
*2 Setting available with Type set to BOSS Limitr, Rack 160D, or Vtg
Rack U.
*3 Setting available with Type set to Multi Band.
*4 Setting available with Type set to Natural.
Chapter 8 Parameters Guide

OD/DS

(Overdrive/Distortion)

This effect distorts the sound to create long sustain.
It provides 12 types of distortion settings.
Parameter/ Explanation
Range
OD/DS (Overdrive/Distortion ON/OFF)
Turns the OD/DS effect on/off.
Off, On
Pressing [OD/DS] switches On and Off.
Type
Selects the type of distortion.
This not only functions as a booster, but also
Booster produces a clean tone that has punch even
when used alone.
This is an overdrive sound that provides distor-
Natural
tion with a natural feeling.
Models the TECH21 SANSAMP BASS DRIVER
Bass Driver
DI.
Bass OD Overdrive tuned especially for use with basses.
This is a crunch sound of the BOSS BD-2.
Blues OD This produces distortion that faithfully repro-
duces the nuances of picking.
Bass DS Distortion tuned especially for use with basses.
GUV DS This models a Marshall GUV' NOR.
Bass MT Wild, radical distortion sound.
This is the sound of the BOSS MT-2.
Metal Zone It produces a wide range of metal sounds, from
old style to slash metal.
Bass FUZZ Fuzz tuned especially for use with basses.
This models an Electro-Harmonix Big Muff π.
MUFF FUZZ
With this effect, distortion is applied only to the
HiBandDrive high frequency sounds, and not to the sounds
in the low frequency range.
Drive
0–100 Adjusts the depth of distortion.
Tone
-50–+50 Adjusts the tone.
EffectLev (Effect Level)
0–100 Adjusts the volume of the OD/DS sound.
DirectLev (Direct Level)
0–100 Adjusts the volume of the direct sound.
BottomLev (Bottom Level)
Extracts the low-frequency components of the
0–100 sound input to this effect, and adjusts the
amount added to the effect sound.
MONO
101