Turning The Power On; Specify The Type Of Amplifier You Have Connected; Using The Tuner; Tuner Settings - Boss GT-1000 Owner's Manual

In this manual, the order of the MENU operations is written as
follows.
<Example>
Press the [MENU] button.
Use the [2] knob to select "IN/OUT SELECT. "
Use the [1] knob to select "INPUT. "
Choose [MENU] 0 "IN/OUT" 0 "INPUT. "

Turning the Power On

Turn the power on in the order of steps
To turn the power off, reverse the order.
Specify the Type of Amplifier You Have
Connected
Choose [MENU] 0 "IN/OUT SETTING" 0 "MAIN OUT" 0
1.
"OUTPUT SELECT."
The menu screen appears.
2.
Turn knob [1] to select the type of amp.
For details on the amp types, refer to the "GT-1000 Parameter Guide"
(PDF file).
MEMO
In order to take full advantage of the GT-1000's capabilities, we
recommend that you connect to an input that is not affected
by a preamp; for example, you should connect to a RETURN
jack rather than to a guitar input jack which is affected by the
preamp of your guitar amp.

Using the Tuner

The GT-1000 is equipped with a conventional monophonic tuner
which lets you tune your instrument one string at a time, and a
polyphonic tuner which lets you play and tune all of your open strings
simultaneously.
?
1 5
– .
1.
Press the [CTL3] (TUNER) switch.
The tuner screen appears.
You can use the PAGE [K][J] buttons to switch the tuner display.
Monophonic/polyphonic display
Monophonic display
Polyphonic display
You can also start the tuner as follows.
1. Choose [MENU] 0 "TUNER."
"TUNER" is located in the second page of the menu. Use the PAGE [K]
[J] buttons to access the second page.

Tuner Settings

To make tuner settings, use knobs [1]–[6] located below the display.
Tuner settings
Parameter Value
[1] MODE NORMAL, STREAM
435–445 Hz
[3] Pitch
(default: 440 Hz)
MUTE
BYPASS
[4] OUTPUT
THRU
6-REGULAR,
6-DROP D,
[5] TYPE
7-REGULAR,
7-DROP A
[6] OFFSET -5–-1
Getting Ready
Explanation
Specifies the meter display method
for the monophonic tuner.
Specifies the reference pitch.
Sound will not be output while
tuning.
While tuning, the sound of the guitar
being input to the GT-1000 will be
output without change. All effects
will be off.
Allows you to tune while hearing the
current effect sound.
* Only for monophonic tuner.
Selects the type of tuning for the
polyphonic tuner.
Adjusts the reference pitch of the
polyphonic tuner in semitone units
relative to standard tuning.
3