Boss GT-10B Owner's Manual page 103

Bass effects processor
Hide thumbs Also See for GT-10B:
Table of Contents

Advertisement

Type=CONCERT 810
Parameter/
Explanation
Range
Mid Freq (Middle Frequency)
220Hz, 800Hz,
Specifies the center of the frequency range that
3.0kHz
will be adjusted by the Mid Freq.
Bright
Turns the bright setting on/off.
Off
Bright is not used.
Bright is switched on to create a lighter and
On
crisper tone.
Ultra Lo
-, 0, +
This controls the character of the lower range.
Ultra Hi
This controls the ultra high-frequency range ly-
Off, On
ing beyond treble.
Type=BASS 360
Parameter/
Explanation
Range
Bright
Turns the bright setting on/off.
Off
Bright is not used.
Bright is switched on to create a lighter and
On
crisper tone.
Type=T.E.
Parameter/
Explanation
Range
Mid Freq (Middle Frequency)
220Hz, 800Hz,
Specifies the center of the frequency range that
3.0kHz
will be adjusted by the Mid Freq.
Pre Shape
This is a shape switch that adds a particular nu-
Off, 1, 2
ance to the midrange.
Type=SESSION
Parameter/
Explanation
Range
Mid Freq (Middle Frequency)
220Hz, 800Hz,
Specifies the center of the frequency range that
3.0kHz
will be adjusted by the Mid Freq.
Enhancer
This controls the clarity and presence of the
0–100
sound.
Chapter 8 Parameters Guide
Type=GTR Clean, GTR Crunch
Parameter/
Explanation
Range
Presence
0–100
Adjusts the tone for the ultra high frequency range.
Bright
Turns the bright setting on/off.
Off
Bright is not used.
Bright is switched on to create a lighter and crisper
On
tone.
Gain Sw
Provides for selection from three levels of distor-
tion: Low, Middle, and High. Distortion will suc-
cessively increase for settings of Low, Middle and
Low,
High.
Middle,
High
The sound of each Type is created on the basis that the
Gain is set to Middle. So, normally set it to Middle.
Solo Sw
Solo Sw is switched on to create the tone to one suit-
Off, On
able for solos.
SoloLevel
0–100
Adjusts the volume level when the Solo Sw is ON.
Type=GTR Drive, GTR Metal
Parameter/
Explanation
Range
Presence
0–100
Adjusts the tone for the ultra high frequency range.
Gain Sw
Provides for selection from three levels of distor-
tion: Low, Middle, and High.
Distortion will successively increase for settings of
Low,
Low, Middle and High.
Middle,
High
The sound of each Type is created on the basis that the
Gain is set to Middle. So, normally set it to Middle.
Solo Sw
Solo Sw is switched on to create the tone to one suit-
Off, On
able for solos.
SoloLevel
0–100
Adjusts the volume level when the Solo Sw is ON.
103

Advertisement

Table of Contents
loading

Table of Contents