Configure The Power Saving Settings; Configuring The Display Settings; Confirming The Device Information; Resetting The Device - Pioneer STZ-D10T-G Operating Instructions Manual

Configure the power saving settings

By configuring the power saving settings, you can save the battery's power and reduce the amount of power used.
To configure the power saving settings, select Power Save in the Setup menu.
You can set Display Off and Auto Power Off separately for when operating by battery or AC adapter.
See the table below for the options available for each setting. The defaults, if not stated, are listed in bold.
Setting
Display Off
Auto Power Off

Configuring the display settings

To configure the display brightness, select Display in the Setup menu. You can select from Light / Dark.

Confirming the device information

By selecting Information in the Setup menu, you can display Software (the device's software version), Total Track (the total number of tracks saved),
Used/Remain (memory used/available), and Software License (the software license agreement for the device).
! Pressing the ENTER button while the Software License is selected shows the details of the software license agreement.

Resetting the device

To entirely restore the device back to the factory default settings, select Reset Setting in the Setup menu.
% Choose Yes and then select ENTER.
When Power will turn off automatically. is shown and the device's power turns off (standby), resetting is complete.
30
En
Settings for battery
powered use
Power Save
Battery
Battery
AC Power
What it does
The display screen will turn off when no activity takes place on the device for a speci-
fied amount of time.
! When the display screen is turned off, you can press any button to turn it back on.
You can configure the device so that the power turns off automatically (standby) if
there is no activity or playback is stopped for five minutes.
Settings for AC adapter
powered use
Battery
Display Off 30 sec.
Display Off
Auto Power Off Yes
Display
Brightness Brightness Light
Information
Software: *.**
Total Track: ***
Used/Remain: *.*GB/1.5GB
Software License Software License
Reset Setting
No No
Yes
AC Power
Display Off 30 sec.
Display Off
Auto Power Off Yes
Option(s)
No (Don't turn off the display screen)
5 sec. (5 seconds)
10 sec. （10 seconds）
30 sec. （30 seconds）
No
Yes