Power Off - Pioneer DJM-909 Training Manual

2. Display Check Mode
To enter this mode, while holding the CH1 FADER CURVE/ BANK EDIT and CH2 FADER CURVE/ BANK EDIT buttons pressed, press the
POWER button.
Disply Check Mode : ON

POWER OFF

CH1 FADER CURVE
/BANK EDIT
Disply Check Mode : CANCEL
POWER OFF
• In this mode, you can check if the input to each button or VR is normal and if the display functions normally by observing the corresponding
indications, as shown in the table below:
Type Button
CH1 BANK1
CH1 BANK2
CH1 BANK3
CH2 BANK1
CH2 BANK2
CH2 BANK3
CH1 FX ADJ.
CH1 FADER CURVE/ BANK EDIT
CH2 FX ADJ.
CH2 FADER CURVE/ BANK EDIT
CH1 EFFECT
CH2 EFFECT
CH1 TAP
CH2 TAP
Touch panel
CH1 TIME/SELECT
CH2 TIME/SELECT
CH1 MIX/DEPTH
CH2 MIX/DEPTH
SERVICE MODE
CH2 FADER CURVE
/BANK EDIT
The LED for CH1 BANK1 lights up.
The LED for CH1 BANK2 lights up.
The LED for CH1 BANK3 lights up.
The LED for CH2 BANK1 lights up.
The LED for CH2 BANK2 lights up.
The LED for CH2 BANK3 lights up.
The CH1 EFFECT2 indication on the LCD lights up.
The CH1 EFFECT3 indication on the LCD lights up.
The CH2 EFFECT2 indication on the LCD lights up.
The CH2 EFFECT3 indication on the LCD lights up.
The LED for CH1 EFFECT lights up.
The LED for CH2 EFFECT lights up.
The CH2 EFFECT1 indication on the LCD lights up.
The CH2 EFFECT1 indication on the LCD lights up.
The CH1 EFFECT1 indication on the LCD lights up.
The value of the CH1 parameter on the LCD increases as the CH1 TIME/SELECT button is turned clockwise.
The value of the CH2 parameter on the LCD increases as the CH2 TIME/SELECT button is turned clockwise.
The value of the CH1 BPM indication on the LCD increases as the CH1 MIX/DEPTH button is turned clockwise.
The value of the CH2 BPM indication on the LCD increases as the CH2 MIX/DEPTH button is turned clockwise.
18
Disply Check
Mode
POWER ON
Indication
Release