Aastra 6755i User Manual page 77

Configuring a Line Key
You can set a key as an additional line on the 6755i. The key acts as a line that behaves the same as
a hard line key. For more information about the behavior of line keys, see
Appearances"
You use the Aastra Web UI to set a key as a line.
Aastra Web UI
Use the following procedure to set a key to function as a line. The procedure shows the softkey
screens as an example.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the "Type" field, select Line to apply to the key.
4. In the "Label" field, enter a label to apply to this key.
5. In the "Line" field, select a line to apply to this key.
Valid values are 5 through 9.
6. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this
softkey.
Model 6755i IP Phone User Guide
on page 60.
"Multiple Line and Call
69