Aastra 6755i User Manual page 100

Programmable Keys
7. Select from "Key 1" through "Key 6"
8. In the "Line" field, select a line to apply Automatic call distribution. Valid values are 1
through 9.
Expansion Module Keys
9. Select from "Key 1" through "Key 36" (M670i)
or
Select from "Key 1" through "Key 60" (M675i)
10. (M675i) In the "Label" field, enter a label to apply to this ACD key.
11. In the "Line" field, select a line to apply Automatic call distribution. Valid values are 1
through 9.
12. Click
Using the ACD Feature on your IP Phone
The ACD feature allows you to login to a phone queue in order to receive distributed calls on
your IP phone. To login to a phone queue, you must preconfigure an ACD softkey,
programmable key,. or expansion module key on your IP Phone as described in the previous
procedure.
Your Administrator sets up the queue that you access when you press the ACD Key. Contact
your System Administrator for more information.
When you press the ACD Key, the phone prompts you to enter a User ID and Password to login
into the queue. Once logged in, you can make your phone "available" or "unavailable" to take
calls by pressing the Available/Unavailable Key (
When you set the IP phone to "available," the server begins distributing calls to your phone.
When you set the IP phone to "unavailable," the server temporarily stops distributing calls to
your phone.
The LED for the ACD Key shows the current status of your phone.
92
Note:
It is recommended you configure no more than a single ACD programmable
key or Expansion Module key per IP phone.
to save your changes.
). The server monitors your IP phone status.
Model 6755i IP Phone User Guide