Connecting To The Network And To Power; Power Adapter - Aastra 6753i Installation Manual

Shared Network Connection
To connect a network device (such as a computer) to the phone, connect an
Ethernet Cable into the network port on the top of the phone marked with
PC
. Plug the other end of the Ethernet cable into the network jack on the
network device you are sharing the network connection with.
Network Jack
(if Inline power provided,
do not install the power adapter)
Other Network Devices
PC
Note: The jack on the 6753i does not supply inline power onto other network
devices. All Ethernet cables used must be minimum category 5/5e straight-
through cables, such as the cable provided with your phone.

Connecting to the Network and to Power

Power Adapter

Use the power adapter (provided by your System Administrator) with your
phone and plug your phone into a power source.
Inline Power Provided
If your network provides 802.3af compliant in-line power, the phone is
powered through the network.
1. On the top of your phone, connect the Ethernet cable (provided with
your phone) into the network port marked with
8 Model 6753i IP Phone Installation Guide
Ethernet
Cables
Power Adapter
Connection
To Network
To Other
Network Device
Power
Adapter
LAN
.