Connecting To The Network And To Power - Aastra 6731i Installation Manual

Connecting to the Network and to Power

Power Adapter
Use the power adapter (sold separately and provided by your System Administrator) with your phone and plug your phone
into a power source.
Inline Power Provided
If your network provides 802.3af compliant in-line power, the phone is powered through the network.
1. On the top of your phone, connect the Ethernet cable (provided with your phone) into the network port marked
LAN
with .
2. Plug the other end of the Ethernet cable directly into the network jack on the wall.
Network Jack
(if inline power provided)
Note:
For power, use the 48V AC Power Adapter (limited power source (LPS) power supply, Input rated 100-240Vac. 50-60Hz,
0.6A. Output rated 48Vdc, 0.31A min, included only in specific Aastra ordering SKUs) to connect from the DC power
port on the phone to a power source.
41-001266-06 REV02 – 04.2012
Ethernet
Cable
Installation and Setup
To Network
8