Connecting To The Network And To Power; Power Adapter - Aastra 6731i Installation Manual

Connecting to the Network and to Power

Power Adapter

Use the power adapter (sold separately and provided by your System
Administrator) with your phone and plug your phone into a power source.
Inline Power Provided
If your network provides 802.3af compliant in-line power, the phone is
powered through the network.
1. On the top of your phone, connect the Ethernet cable (provided with
your phone) into the network port marked with
2. Plug the other end of the Ethernet Cable directly into the network jack
on the wall.
Network Jack
(if Inline power provided,
do not install the power adapter)
Note: For power, use the 48V AC Power Adapter (limited power source (LPS) power
supply, Input rated 100-240Vac. 50-60Hz, 0.6A. Output rated 48Vdc, 0.31A min,
included only in specific Aastra ordering SKUs) to connect from the DC power
port on the phone to a power source.
10 Model 6731i IP Phone Installation Guide
Ethernet
Cable
LAN
.
To Network