Installation And Setup; Direct Or Shared Network Connection - Aastra 6753i Installation Manual

Installation and Setup

The 6753i can be setup to share a network connection with another network
device. Power can be provided by the supplied power adapter or by an
802.3af compliant network power source or with a PoE inline power
injector (optional accessory). If your System Administrator has already
setup your phone, please refer to the 6753i User Guide for call handling
information or contact your System Administrator.

Direct or Shared Network Connection

The phone can be set up as a direct network connection to the Ethernet
wall jack or as a shared network connection as a pass-through if connecting
the phone to a computer or another network device.
Direct Network Connection
Located at the top of the phone are two fully switched 10/100 Mbps
Ethernet cable ports. The port marked with
phone to the network, as well as provide power to your phone (if required).
See "Connecting to the Network and to Power" on
information.
Network Jack
(if Inline power provided,
do not install the power adapter)
Separate
Network
Jack
Other Network Devices
Ethernet
Cable
Model 6753i IP Phone Installation Guide 7
LAN
is used to connect the
page 8 for more
To Network
Power
Adapter
Power Adapter
Connection