Tools And Supplies Needed; How To Use This Guide - Intel AXX6DRV3GEXP Installation Manual

Tools and Supplies Needed

*
Phillips (cross head) screwdriver (#2 bit)
Flat-head screwdriver
Anti-static wrist strap (recommended)
Needle-nosed pliers
Serial ATA RAID card (dependent on installation)
SAS RAID card (dependent on installation)

How to use this Guide

If you are installing drive cage upgrade kits into an Intel® Server Chassis SC5400, SC5400 Base
Redundant Power (BRP) or SC5400 LX follow the instructions under the section titled "Intel®
Server Chassis SC5400 Installation."
For either chassis, if you are installing hot swap drives, follow the instructions under the section
titled "Install Hot Swap Hard Drives".
For the Intel Server Chassis SC5400, if you are installing fixed drives, follow the instructions under
the section titled "Install Fixed Hard Drives."
4 Before You Begin