11
Making copies
How to copy
Entering Copy mode
When you want to make a copy, press
(Copy) to illuminate it in blue.
The LCD shows:
01
1
Quality
Enlarge/Reduce
Ratio:
Tray Select
COPY
1 No. of Copies
You can enter the number of copies you want
by using the dial pad.
Press a or b to scroll through the Copy key
options.
Quality (See page 89.)
Enlarge/Reduce (See page 89.)
Tray Select (MFC-6490CW)
(See page 93.)
Paper Type (See page 93.)
Paper Size (See page 93.)
Brightness (See page 92.)
Contrast (See page 93.)
Stack/Sort (See page 92.)
Page Layout (See page 90.)
Skew Adjustment (MFC-6490CW)
(See page 94.)
Book Copy (See page 94.)
Watermark Copy (See page 95.)
Set New Default (See page 96.)
Factory Reset (See page 96.)
When the option you want is highlighted,
press OK.
88
11
11
Normal
100%
Tray#1
Copy
Press Start
Note
• The default setting is Fax mode. You can
change the amount of time that the machine
stays in Copy mode after the last copy
operation. (See Mode Timer on page 26.)
• Book Copy and Watermark Copy
features are supported by technology
from Reallusion, Inc.
Making a single copy
a
Press
(Copy).
b
Load your document.
(See Loading documents on page 22.)
c
Press Mono Start or Colour Start.
Making multiple copies
You can make up to 99 copies in one print
run.
a
Press
(Copy).
b
Load your document.
(See Loading documents on page 22.)
c
Enter the number of copies you want.
d
Press Mono Start or Colour Start.
Note
To sort the copies, press a or b to choose
Stack/Sort. (See Sorting copies using
the ADF on page 92.)
Stop copying
To stop copying, press Stop/Exit.
11
11
11
11