Checking The Ink Volume; Machine Information; Checking The Serial Number; Packing And Shipping The Machine - Brother MFC-5890CN User Manual

Checking the ink volume

Although an ink volume icon appears on the
LCD, you can use the Ink Management key
to see a large graph showing the ink that is
left in each cartridge.
a
Press Ink Management.
b
Press a or b to choose Ink Volume.
Press OK.
The LCD shows the ink volume.
c
Press Stop/Exit.
Note
You can check the ink volume from your
computer. (See Printing for Windows
Printing and Faxing for Macintosh in the
Software User's Guide on the CD-ROM.)

Machine Information

Checking the serial number

You can see the machine's serial number on
the LCD.
a
Press Menu.
b
Press a or b to choose
Machine Info.
Press OK.
c
Press a or b to choose Serial No.
Press OK.
d
Press Stop/Exit.
Troubleshooting and Routine Maintenance
Packing and shipping
B
the machine
When you transport the machine, use the
packing materials that came with your
machine. Follow the instructions below to
properly pack your machine. Damage caused
to your machine during transit is not covered
by your warranty.
CAUTION
It is important to allow the machine to 'park'
the print head after a print job. Listen
carefully to the machine before unplugging
it to make sure that all mechanical noise
®
or
has stopped. Not allowing the machine to
finish this parking process may lead to print
problems and possible damage to the print
head.
a
B
Open the ink cartridge cover.
b
Press the lock release lever to release
B
the ink cartridge and take out all the ink
cartridges. (See Replacing the ink
cartridges on page 157.)
c
Install the green protective part and then
close the ink cartridge cover.
B
B
165