HP D5970A - NetServer - LCII Service & Reference Manual page 77

Hardware
Processors
Chipset
Memory
Video
SCSI
IDE
LAN
PCI Bus
I/O
CD-ROM
Weight and Dimensions
Weight
Height
Width
Depth
Power Supply Specifications
Type
Input - Max. Range
Operating Current
In-rush Current
Operating Power
Intel Pentium II or III (up to 2 processors), supported speeds: 400, 450,
and 500MHz. 512KB level 2 cache on processor.
Intel 440BX AGPset with 66/100 MHz bus speed support.
Supports up to four SDRAM DIMMS for a maximum total of 1GB.
Supported DIMM types: 64MB, 128MB, or 256MB unbuffered, 72 bits
wide, ECC single-bit correcting, multi-bit detecting.
AGP slot (rev. 1.0 compliant) with bundled ATI Rage IIc AGP
(Accelerated Graphics Port) video with 4MB SDRAM. Supports up to
1600x1200, 65K colors. AGP IRQ Enable/disable jumper is set to
disable by default. Set to enable if DVD or other video application is
used.
Embedded Adaptec AIC-7895 Ultra/wide SCSI dual channel PCI
controller. 40MB/s transfer rate, two 68-pin connectors.
Embedded Ultra DMA/33 E-IDE dual channel PCI controller.
Embedded Intel 82559 10/100 PCI Fast Ethernet Controller. Wake up on
LAN enable/disable via BIOS setup.
32-bit, 33MHz speed. PCI rev. 2.1 compliant.
Two Serial ports. One bi-directional parallel port with ECP/EPP high
speed support. PS/2 style mouse and keyboard connectors.
Bundled HP D4384A CD-ROM drive. IDE interface. 32x speed.
Approx. 30 lbs (14 kg.), depending on configuration – excludes
keyboard and monitor.
17.09 inches (434 mm)
7.1 inches (180mm)
11.67 inches (296.5mm) Feet opened
19.57 inches (497mm)
Auto-ranging
100 to 127 VAC ~5 A at 50/60 Hz
200 to 240 VAC ~ 2.85 A at 50/60 Hz
100 VAC: 5.3 A
120 VAC: 4.6 A
200/208 VAC: 3.2 A
220/230 VAC: 2.8 A
25 A
305 W
71