WARNING:
Do not disable the power cord grounding plug. The grounding plug is an important safety
•
feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
•
times.
•
Unplug the power cord from the power supply to disconnect power to the equipment.
Do not route the power cord where it can be walked on or pinched by items placed against
•
it. Pay particular attention to the plug, electrical outlet, and the point where the cord
extends from the server.
217.7 kg
480 lb
CAUTION:
clearance at the front and back of the server.
CAUTION:
operation, plug the AC power cord into a properly grounded AC outlet only.
Insight Display errors
The enclosure installation is successful when all errors are corrected. The errors in the following sections
are specific to installation and initial configuration of the enclosure. To clear errors that occur after initial
powerup and configuration, see the HP BladeSystem Onboard Administrator User Guide for information.
The following types of errors can occur when installing and configuring the enclosure:
•
Power errors (on page 80)
•
Cooling errors (on page 80)
•
Location errors (on page 80)
•
Configuration errors (on page 80)
•
Device failure errors (on page 81)
When the enclosure UID LED is off, the Insight Display is illuminated amber when any error condition
exists. The navigation bar displays the following selections when an error condition exists:
•
Health summary icon—Displays the Health Summary screen.
•
Fix THIS—Suggests corrective action to clear the current error.
•
Next Alert—Displays the next alert, or if none exist, displays the Health Summary screen.
To reduce the risk of electric shock or damage to the equipment:
WARNING:
To reduce the risk of personal injury or damage to the equipment:
Observe local occupation health and safety requirements and guidelines for
•
manual handling.
•
Obtain adequate assistance to lift and stabilize the chassis during installation or
removal.
The server is unstable when not fastened to the rails.
•
•
When mounting the server in a rack, remove the power supplies and any other
removable module to reduce the overall weight of the product.
To properly ventilate the system, you must provide at least 7.6 cm (3.0 in) of
The server is designed to be electrically grounded (earthed). To ensure proper
Troubleshooting 79