Navigating The Insight Display - HP Xw460c - ProLiant - Blade Workstation Setup And Installation Manual

Select Continue, and press the OK button to begin checking for configuration and installation errors.
9.
The enclosure UID automatically turns off. If Push Settings = Yes:
The enclosure settings are pushed to adjacent enclosures
o
The installation wizards run on each adjacent enclosure
o
The enclosure UID turns off on the adjacent enclosures
o
If no errors are detected, the rear enclosure UID turns off, and the Insight Display screen illuminates
10.
green. Press the OK button to return to the Main Menu. Enclosure and blade hardware setup and
configuration is complete.
If errors are detected, the Insight Display screen illuminates amber, and the Health Summary screen
appears. For more information on troubleshooting configuration and installation errors, see Insight
Display errors (on page 79).
IMPORTANT:
corrected immediately.
Open a browser and connect to the active Onboard Administrator module using the Onboard
11.
Administrator IP address that was configured during the Insight Display installation wizard process.
Enter the user name and password from the tag supplied with the Onboard Administrator module to
12.
access the remote Onboard Administrator web interface and complete the Onboard Administrator
first time installation wizard.

Navigating the Insight Display

Navigate through the menus and selections by using the arrow buttons on the Insight Display panel
BladeSystem Insight Display
to a menu item, and then press the OK button to go to selected screen.
All configuration errors prevent the operation of the enclosure and should be
components" on page 16). Use the arrow buttons to move the selection box
HP BladeSystem Insight Display 68
("HP