Mapping To Interconnect Ports - HP Xw460c - ProLiant - Blade Workstation Setup And Installation Manual

NOTE:
specific user guide.
To install an interconnect module:
Remove the interconnect blank, if applicable.
1.
If you are installing a double-wide interconnect module, remove the interconnect bay dividers
2.
("Removing interconnect bay
Install the interconnect module, and close the release lever.
3.

Mapping to interconnect ports

Several port types are referenced in the following tables.
•
Examples of 1x ports are 1-Gb Ethernet (1 GbE) switch modules and Fibre Channel interconnect
modules.
For more information on how and where to install mezzanine cards, see the server-
dividers" on page 55).
Installation 48