Removing The Front Bezel - HP Workstation xw6000 Hardware Reference Manual

Hardware Upgrades

Removing the Front Bezel

✎
2–4
To remove the front bezel:
1. Shut down the operating system properly, then turn off the
workstation and any external devices.
2. Disconnect the power cord from the grounded AC outlet.
3. Remove the workstation access panel. See "Removing the
Workstation Access Panel" in this chapter.
4. Remove the bezel:
a. Push in on the two front bezel release latches 1 .
b. Rotate the front bezel away from the chassis 2 to release it.
Pressing the tabs to remove the front bezel
When replacing the front bezel, ensure that the bottom hinge points
are properly placed in the chassis before rotating the front bezel back
into its original position.
Hardware Reference Guide