Hardware Upgrades; Installation Sequence - HP Workstation xw6000 Hardware Reference Manual

✎

Installation Sequence

Å
Å
Hardware Reference Guide
This chapter explains how to remove the workstation access panel and
the front bezel. It also explains how to install the following hardware
components:
■
Memory
■
Drives
■
Expansion boards
■
Processors
Finish the setup procedures for the preinstalled software before you
install any optional hardware or third-party devices that were not
included with your workstation.
Follow this sequence of steps to ensure the proper installation of any
optional equipment. Before you begin, observe the following
precautions.
WARNING: To reduce the risk of personal injury from hot surfaces,
allow the internal system components to cool before touching them.
WARNING: To reduce the risk of electrical shock, fire, or damage to the
equipment, do not plug telecommunications/telephone connectors into
the network interface controller (NIC) receptacles.

Hardware Upgrades

2
2–1