Removing The Workstation Access Panel - HP Workstation xw6000 Hardware Reference Manual

Removing the Workstation Access Panel

✎
Hardware Reference Guide
To remove the workstation access panel:
1. Shut down the operating system properly, then turn off the
workstation and any external devices.
2. Disconnect the power cord from the grounded AC outlet.
3. Loosen the two thumbscrews 1 as shown in the following
illustration.
4. Slide the access panel 2 back.
Loosening the two thumbscrews and removing the workstation access
panel
When replacing the workstation access panel, be sure to tighten both
thumbscrews.
Hardware Upgrades
2–3