Hardware Upgrades
Installing DIMMs
Ä
Removing DIMMs
2–8
To install a DIMM:
1. Shut down the operating system properly, then turn off the
workstation and any external devices. Disconnect the power cord
from the grounded AC outlet.
2. Remove the workstation access panel.
3. Locate the DIMM sockets.
CAUTION: Be sure to follow the correct configuration guidelines or your
system will not function.
4. Refer to the following illustrations to install memory modules.
Installing a DIMM
5. Reassemble the workstation.
To remove a memory module from a DIMM socket, reverse the
procedures in the previous section.
Hardware Reference Guide