Adaptec Workstation x1000 Installation Manual page 92

Adaptec RAID Installation Guide
Part
ECCERR
IRQ, 8..1
J1
J5
J6
J10
J11
J12
J14
J16
J18
J19
TPOWERA
TPOWERB
TPOWERC
TPOWERD
TERMEN_
A
TERMEN_
B
TERMEN_
C
TERMEN_
D
A-8
Description
ECC Error LED (red)
Adapter activity LEDs
Cache memory socket. (During operation, this socket
must contain a memory module.)
Pins 1–2 NVRAM reset
Pins 3–4 Reserved—do not use
Flash Mode 0
Internal Wide Ultra160 SCSI connector for Channel A
External Wide Ultra160 SCSI connector for Channels A
& B
Battery module connector
Internal Wide Ultra160 SCSI connector for Channel B
External Wide Ultra160 SCSI connector for Channels C
& D
Hard drive activity LED connector. (Pin 1 is nearest
the bracket.)
Reserved—do not use
Termination power status LED
Termination power status LED
Adaptec 3410S only—Termination power status LED
Adaptec 3410S only—Termination power status LED
Termination-enabled status LED
Termination-enabled status LED
Adaptec 3410S only—Termination-enabled status
LED
Adaptec 3410S only—Termination-enabled status
LED