Netware 5.X - Adaptec Workstation x1000 Installation Manual

Adaptec RAID Installation Guide
8
Press Esc to exit when prompted.
9
To begin using Storage Manager Pro, restart the server.
Alternatively, you can start Storage Manager Pro without
shutting down the server by typing
startx
search add sys:\adaptec\SMPro
asmpsrvr.ncf

NetWare 5.x

As prerequisites for installing Storage Manager Pro in a
NetWare 5.x system, you need to
1
Install the minimum support packs for your NetWare
server.
2
Configure the IP address for the sever. If you do not use or
have access to DNS, add an entry to the
that contains the IP address of your server and its name.
This allows Java applications to resolve the local host to the
IP address of your server.
To install Storage Manager Pro
1
Insert the Adaptec RAID Installation CD into your drive.
The server automatically mounts the CD.
2
From the system console, type
load adaptecraid_v1:\packages\netware\5.x\apps\SMPro\setup.nlm
3
If Storage Manager Pro is not already installed, skip this
step. If Storage Manager Pro is already installed, you must
uninstall Storage Manager Pro before reinstalling it. To
uninstall
a
Shut down the ASMProServer service by typing
asmpstop
from the system console.
b
Use the Remove Above Product option to uninstall.
4
From the Select Product Option window, select Adaptec
Storage Manager Pro and press Enter. When the process
is complete, the files will be installed in
4-6
file
sys:\etc\hosts
sys:\adaptec\smpro
.