Table of Contents
Advertisement
Adaptec RAID Installation Guide
7
When prompted, insert the driver disk you created in Step 1
and select OK.
8
Follow the prompts to setup your preferred environment; for
example, your preferred language and keyboard type.
9
If you are installing from a CD, select Local CD-ROM. The
system asks you to add a device. Select Add device.
10
Scroll down and select the Adaptec driver. The system
informs you that it has found the Adaptec I
Adapter.
11
If you intend to install other third-party devices, proceed
with the installation of those devices. Otherwise, select
Done.
12
Continue with the Linux installation according to the Red
Hat documentation.
installing the driver in an existing Linux system
The Adaptec RAID Installation CD contains precompiled module
drivers and storage management software in RPM (Red Hat
Package Manager) format. For current information, visit
linux.adaptec.com
The 2.0 driver RPM has precompiled module drivers for the
following kernels:
Vendor
Red Hat
SuSE
Note: If your kernel is not listed, you need to create a
custom driver.
3-32
.
Version
7.0
6.2
7.0
6.4
Kernel Version
2.2.16-22; 2.2.16-22smp
2.2.14-5.0; 2.2.14-5.0smp
2.2.16; 2.2.16smp
2.2.14; 2.2.14smp
O RAID Host
2
http://
Advertisement
Table of Contents
