Sco Unix - Adaptec Workstation x1000 Installation Manual

Adaptec RAID Installation Guide
5
Start up the server. During startup, press Ctrl+A to start
SMOR. Use SMOR to create the RAID. For details, refer to
using SMOR on page
6
Start NetWare and insert the driver disk you created in
Step 2.
7
When the console prompt appears, type load nwconfig and
press Enter.
8
Select Driver.
9
Select Disk Driver.
10
Install
i2opci.nlm
location for the files.

SCO UNIX

The Adaptec RAID Installation CD contains a driver for each
version of SCO. You use the CD to create driver disks. Two disks
are required to store all of the drivers. To create the driver disks
1
Start up the system from the CD and select Create driver
disks.
2
Select the SCO operating system you are using.
3
Insert floppy disks when prompted until all drivers are
copied.
Alternatively, you can use the
images directly from the CD to a floppy disk. The following disk
images are on the Adaptec RAID Installation CD:
Open Desktop 3.x
OpenServer 5.x
3-26
2-11.
and
bkstrosm.ham
dd
Driver
/packages/
Open_Desktop_3/image
/packages/
Open_Server_5/image
. Specify
command to copy the disk
Storage Manager and
RAIDUTIL
/packages/
Open_Desktop_3/apps/sm
/packages/
Open_Server_5/apps/sm
as the
a:\