Configuring A Scsi Accessory Using Scsiselect - HP Vectra XA 6/xxx User Manual

naj-scsi.bk : naj-scsi.fb4 Page 6 Friday, January 3, 1997 3:05 PM
ATTENTION
Viewing the Options
menu

Configuring a SCSI Accessory using SCSISelect

The SCSISelect utility is intended for advanced users only.
Note that the SCSISelect options displayed on your screen
may be different from those described here.
The SCSISelect utility is accessed by pressing
when prompted during the computer's start-up process. The message
Press <Ctrl><A> for SCSISelect(TM) Utility!
(For French and Arabic French keyboards, press
When you run the SCSISelect utility, the Options menu is displayed.
SCSISelect(TM) Utility v1.xxx
Would you like to configure the interface, or run the
SCSI disk utilities? Select the option and press <Enter>.
Press <F5> to switch between color and monochrome modes.
Configure/View Interface Settings
SCSI Disk Utilities
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit
Use the and keys and the
the SCSISelect utility. Press
menu.
6
Options
key to make selections in
at any time to return to the previous
+ the "A"key
is displayed.
+ the "Q" key.)