HP Vectra XA 6/xxx User Manual page 9

naj-scsi.bk : naj-scsi.fb4 Page 7 Friday, January 3, 1997 3:05 PM
Configure/View
Interface Settings Menu
It is recommend that these settings are not changed.
SCSISelect(TM) Utility v1.xxx
Configuration
SCSI Bus Interface Definitions
Interface SCSI ID
SCSI Parity Checking . . . . . . . . . . . . . . Enabled
Host Adapter SCSI Termination. . . . . . . . . . Automatic
Additional Options
Boot Device Options
SCSI Device Configuration
Advanced Configuration Options . . . . . . . . . Press <Enter>
<F6> - Reset to Interface Defaults
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit
SCSI Channel Interface Definitions:
• Interface SCSI ID
Changes the interface SCSI ID from its default value of 7 (which has
the highest priority on the SCSI bus).
• SCSI Parity Checking
Enable or disable host adapter SCSI parity checking. Most currently
available SCSI devices do support SCSI parity. You should disable
SCSI Parity Checking if any of the attached SCSI devices do not
support SCSI parity.
• Host Adapter SCSI Termination
Sets termination on the SCSI adapter. When set to the default
, the SCSI adapter automatically enables and disables its
Automatic
terminators as needed.
Additional Options:
• Boot Device Options
Press to display the Boot Device Configuration menu,
described on the next page.
. . . . . . . . . . . . . . . 7
. . . . . . . . . . . . . . Press <Enter>
. . . . . . . . . . . Press <Enter>
Using SCSI
7