Hp kayak xa series 05xx, service handbook for desktop models (23 pages)
Summary of Contents for HP Vectra XA 6/xxx
Page 1
twty-fly.fb4 Page 2 Thursday, December 12, 1996 6:19 PM Replacing the LAN 1 Remove the defective board from the PCI slot. Disconnect the External Start cable from the board, if necessary. accessory board in a 2 Mount the PCI slot bracket on the replacement board. standard PCI slot 3 Connect the External Start cable to the replacement board (if required) and then insert the board in the PCI slot.
Page 2
twty-fly.fb4 Page 1 Thursday, December 12, 1996 6:19 PM Replacing the LAN accessory board This document explains how to replace the LAN accessory board: in the dedicated PCI accessory slot (desktop models only) • in a standard PCI slot (desktop and minitower models). •...