Multiple Lun Support; Bios Support For Bootable Cd-Rom; Bios Support For Int13 Extensions; Support For Ultra Scsi Speed - HP Vectra XA 6/xxx User Manual

naj-scsi.bk : naj-scsi.fb4 Page 12 Friday, January 3, 1997 3:05 PM
SCSI Disk Utilities
Using SCSI

• Multiple LUN Support

This option determines whether booting a SCSI device that has
multiple LUNs is supported. Set this option to
device has multiple LUNs. It is disabled by default.

• BIOS Support for Bootable CD-ROM

When enabled, this option provides BIOS support for booting from a
CD-ROM drive. It is enabled by default.

• BIOS Support for Int13 Extensions

When enabled, this option provides BIOS support for hard disk
drives with more than 1024 cylinders. It is enabled by default.

• Support for Ultra SCSI Speed

When enabled, the SCSI adapter supports the fast transfer rates of
Ultra SCSI devices (13.4 MB/s, 16 MB/s and 20 MB/s). It is enabled
by default.
When the SCSI Disk Utilities are selected from the initial Options menu,
the SCSISelect utility scans the SCSI bus and lists all the SCSI devices
on the SCSI bus. The list shows the SCSI ID and name of each SCSI
device. You can use this list to discover the SCSI ID of any device on the
SCSI bus.
Use the and keys to highlight a device and press
display the
Format Disk
• Format Disk
This utility can be used to perform a low-level format of a hard disk.
Most SCSI disks are preformatted and do not need low-level
formatting.
• Verify Disk Media
This utility scans for media defects on the selected SCSI device.
Press the key to abort this utility.
12
/ menu.
Verify Media
if your boot
Enabled
to