Configuring Scsi Channels On Hp Kayak Xa-S - HP Kayak XA-s 02xx Manual

Configuring SCSI Channels on HP Kayak XA-s

Configuring SCSI Channels on HP Kayak XA-s
Even after validating the SCSI channel in the BIOS setup
(through the Advanced Menu), UltraWide SCSI (Symbios), there
is still no SCSI HDD selected in the boot menu. Why is this?
The HP Kayak XA-s PC Workstations (minitower models), do
not have a SCSI controller. Only the IDE hard disk drives
should be in the boot menu.
In the BIOS, even though the SCSI controllers are displayed and can be
configured, the settings will not be used.
The SCSI on-board controller (not integrated on the system board) is not
preloaded on the HP Kayak XA-s. The UltraWide SCSI controller (Symbios)
is an add-on board that is provided on selected HP Kayak XA-s desktop
models only.
24