Hp Teemtalk; Adding A Teemtalk Connection Using The Teemtalk Creation Wizard - HP t5565 - Thin Client Administrator's Manual

7. Set the appropriate advanced options (refer to
on page
8. Click Finish to save your settings and close the wizard.
NOTE: To enable RDP USB Redirection, use the USB Manager utility. See
on page 38

HP TeemTalk

NOTE: This feature is neither present nor supported on the HP ThinPro image for the HP t5325
Thin Client.
You can add a new HP TeemTalk connection in two ways:
●
Adding a TeemTalk Connection using the TeemTalk Creation Wizard on page 16
●
Adding a TeemTalk Connection Manually on page 17
For more information on HP TeemTalk, see HP TeemTalk Terminal Emulator 7.0 User Guide at
http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01534810/c01534810.pdf.

Adding a TeemTalk Connection using the TeemTalk Creation Wizard

1. To add a TeemTalk connection using the wizard, click Connections > Add.
2. Select Teemtalk and click Teemtalk creation wizard. Set the appropriate connection options:
Table 3-21
Option
Session Name
Transport
Connection
Emulation
Click Next to continue.
3. Set the appropriate advanced options:
Table 3-22
Option
Emulation Printer
Auto Logon
Key Macros
Mouse Actions
16 Chapter 3 Reference
10).
for instructions.
New Teemtalk creation wizard Connection Connection Information Settings
New Teemtalk creation wizard Connection Advanced Options Settings
Table 3-9 New Connection Advanced Settings
Description
The name of the session.
The network transport to use for the connection. Valid transports are: Tcp/Ip,
Serial, SSH2, and SSL.
The connection method to be used. Advanced connection options can be
configured via the button.
Emulation types are: hp70092, IBM 3151, IBM3270 Display, IBM3270
Printer, IBM5250 Display, IBM5250 Printer, MD Prism, TA6530, VT Series,
and Wyse.
Description
The TeemTalk emulation printer settings.
The TeemTalk auto login settings.
The TeemTalk key settings.macro
The TeemTalk mouse actions settings.
USB Manager
ENWW