Client Aggregation configuration is a two-step process:
1.
Configuring the Aggregation Clients on page
be configured.
2.
Configuring the Aggregation Server on page 32
Configuring the Aggregation Clients
Perform this procedure on each Aggregation Client:
1.
Double-click Client Aggregation.
2.
Click Client.
3.
Type the server hostname or IP address of the Aggregation Server in the field.
4.
Click Apply to apply the changes.
Configuring the Aggregation Server
To configure the Aggregation Server:
1.
Double-click Client Aggregation.
2.
Click Server.
32
Chapter 3 Reference
32—From one to three Aggregation Clients can
ENWW