Ssh - HP t5565 - Thin Client Administrator's Manual

NOTE: This feature is neither present nor supported on the HP ThinPro image for the HP t5325
Thin Client.
1. To add an Xdmcp connection, click Connections > Add.
2. Select Xdmcp and set the appropriate configuration options:
Table 3-40
Option
Name
Type
Address
Font Server
Use font server
Font server
Configure display
Click Next to continue.
3. Set the appropriate advanced options (refer to
on page
4. Click Finish save your settings and close the dialog box.

SSH

Secure shell (SSH) is the most common way to gain remote command line access to UNIX-like
operating systems, such as Linux, BSD, and HP-UX. SSH is also encrypted.
1. To add an SSH connection, click Connections > Add.
2. Select SSH and set the appropriate configuration options:
Table 3-41
Option
Name
Network
Address
Port
User name
Run application
Options
ENWW
New Xdmcp Connection Configuration Settings
10).
New SSH Connection Configuration Settings
Description
The name of the connection
The Xdmcp connection type. Valid options are: chooser, query, and
broadcast.
This value is required if the Type value is set to query.
Use a remote X font server instead of locally installed fonts.
Font server is not enabled unless the Use font server option is checked.
Click to set the display configuration for the Xdm connection. If you do not set
this configuration, the default configuration will be used.For information on this
screen, see Display Preferences on page
Table 3-9 New Connection Advanced Settings
Description
The connection name
The IP address of the remote system.
The remote port to use for the connection.
The username to use for the connection.
The application to run to make the connection.
35.
Connections
25