Xdmcp - HP t5565 - Thin Client Administrator's Manual

Click Next to continue.
4. Set the appropriate RDP options:
Table 3-39
Option
Sound redirection
Device mappings
Click Next to continue.
5. Set the appropriate advanced options (refer to
on page
6. Click Finish to save your settings and close the dialog box.
To start a desktop connection using PCoIP instead of RDP:
1. Click Connections > Add.
2. Select a connection in the Connections window and click Connect.
Type the host name of IP address of the View Connection Server in the field, if necessary.
3. Type the user name, password, and domain names in the corresponding fields and click
Connect.
4. Click the arrow on the right side of the Desktop pool. Select Protocols > PCoIP.
5. Click Connect.
NOTE:
desktop/pool settings in the VMware View Manager window (http://<Server>/admin).
NOTE: To set PCoIP as the default protocol or to disable user protocol selection, edit the desktop/
pool settings in the VMware View Manager window (http://<server>/admin).
NOTE: To enable VMware View USB Redirection, use the USB Manager utility. See
on page 38

Xdmcp

XDMCP is a way to connect directly to remote X servers. X servers are used to display graphics on
most UNIX-like operating systems, such as Linux, Berkeley Software Distribution (BSD), and Hewlett
Packard UniX (HP-UX).
24 Chapter 3 Reference
New VMWare View Connection RDP Settings
Enable sound redirection
Enable USB storage
mapping
Enable port mapping
Enable printer mapping
10).
To set PCoIP as the default protocol or to disable user protocol selection, edit the
for instructions.
Description
Valid options are: off, local and remote.
The assigned drive letter should be chosen from the drop-down list.
Allow the mapping of local ports to the remote system.
Allow the mapping of local printers to the remote ystem.
Table 3-9 New Connection Advanced Settings
USB Manager
ENWW