HP t5565 - Thin Client Administrator's Manual page 59

3. Select restore an HP ThinPro image, and then click Next.
4. Select FTP or HTTP protocol. Type the remote server information in the fields.
NOTE:
Be sure of the image file you are using: neither content nor size are verified before the image
upgrade begins.
5. Click Finish.
When the image capture begins, all applications stop and a new window appears showing the
copy progress. If a problem occurs, click Details for information. The desktop reappears after
restoration is complete.
A MD5sum check is done only if the file exists on the FTP server.
NOTE:
contents of the flash drive will be corrupted.
To deploy using a Web Browser connection:
1. Switch to Administrative Mode.
2. Create a Web Browser connection to an HTTP or an FTP server where a ThinPro image
resides.
3. Right click on the link to the ThinPro image file (this is normally a link with a .dd.gz file
extension).
4. select Open Link in HP ThinState.
5. Verify the values displayed and click Finish to launch the deployment of the image.
Restoration is complete.
Capture HP ThinPro Image to a Bootable USB Flash Drive
A bootable USB flash drive with an HP ThinPro image allows you to restore the image or duplicate it
on different thin clients.
NOTE: Back up any data on the USB flash drive before you begin. ThinState automatically formats
the flash drive to create a bootable USB flash drive. This process will erase all data currently on the
flash drive.
1. Double-click ThinState.
2. Select the HP ThinPro image, and then click Next.
3. Select make a copy of the HP ThinPro image, and then click Next.
4. Click create a bootable USB flash drive, and then click Next.
5. Attach a USB flash drive to the thin client. Select the USB key and click Finish.
When the image capture begins, all applications stop and a new window appears showing the
copy progress. If a problem occurs, click Details for information. The desktop reappears after
capture is complete.
HP ThinPro image capture is complete.
ENWW
Username and Password are not required if you are using HTTP protocol.
If you abort a restoration, the previous overwritten image will not be restored and the
Control Panel
51