The Thinpro Taskbar - HP t5565 - Thin Client Administrator's Manual

TeemTalk, LeoStream, vWorkspace, VMware View, X Windows, or Web Browser connection. When
logged in as Administrator, you can define which connections and connection types are visible when
in User mode. The Administrator can further restrict Users from deleting connections or creating new
ones.
You must log in with administrator permissions to access all components of the HP ThinPro window.
When the thin client is in Administrative Mode, the following changes occur:
●
the top section of the window changes from blue to red.
●
the window title adds the text (Administrative Mode).
HP ThinPro opens by default in the User Mode. To switch to the Administrative Mode:
1. Click the HP logo in the bottom left of the screen.
-or-
Position your cursor in the screen background and right-click.
2. Select Administrator/User Mode Switch.
3. Type the Administrative password in the field and click OK.
NOTE:
You can also switch modes as follows:
1. Press Ctrl+Alt+Shift+S, select Switch to Admin Mode, and click OK.
2. Type the Administrative password in the field and click OK.

The ThinPro Taskbar

The ThinPro Taskbar is a bar across the bottom of the screen that contains several controls:
Figure 1-1
1. The HP button - The HP button allows access to basic functionality of the ThinPro operating
system, such as access to the control center, logoff, reboot and power-off functions.
2. Window tasks - Each active window has an icon displayed in this area.
3. Network icon - Displays information about the active network connections.
4. Virtual Keyboard - displays a software keyboard. Input from the virtual keyboard is redirected to
the current focus window. The Virtual Keyboard responds to both keyboard events and mouse or
touchscreen clicks. You can change the layout of the Virtual Keyboard without changing the
2 Chapter 1 Introduction
The default password for Administrative Mode is root.
The ThinPro Taskbar
ENWW