Setup And Installation; Easy Tools Wizard; Installation - HP t5565 - Thin Client Administrator's Manual

2

Setup and Installation

HP ThinPro has a wizard-driven interface to simplifiy the configuration process of a thin client.

Easy Tools Wizard

The Easy Tools Wizard wizard simplifies the configuration and maintenance processes for the
ThinPro software. The wizard opens automatically the first time you switch into Administrative Mode.
To start the wizard after the initial setup, click the hp icon in the left pane.
The Easy Tools Wizard has two main components: Easy Update and Easy Config. Easy Update
allows you to keep the ThinPro image up to date with new images, service packs or additional
packages. Easy Config provides a wizard interface to assist you in setting up your ThinPro
configuration. Both Easy Update and Easy Config are available from the Control Panel >
Management tab.
The Easy Tools thin client management suite is documented in the HP Easy Tools Administrator's
Guide which can be found at http://www.hp.com/support.

Installation

Once you have set up and configured a thin client, copy that image or configuration and deploy it to
other thin clients of identical model and hardware using HP ThinState. See
for more information.
NOTE: PXE imaging is not supported on the HP t5325 Thin Client.
4 Chapter 2 Setup and Installation
ThinState on page 49
ENWW