Lenovo ThinkCentre A62 Deployment Manual page 76

68
Rescue and Recovery 4.3 Deployment Guide
Table 26. BMGR32 parameters (continued)
Parameter
/CFGfile
/DS
/Dn
/H0
/H1
/H2
/H3
/HS
/P12
/INFO
/INFOP
/M0
/M1
/M2
/OEM
/Patchn
Patchfilefilename
/PRTC
/IBM
/Q
/V
/R
/REFRESH
/THINK
/TOC tocvalue
/U0
/U1
Result
Apply the configuration file parameters. See "RRCMD
command-line interface" on page 61 for details regarding the
configuration file.
Return the Master boot record (MBR) data sector (0-based).
Apply changes to disk n, where n is 0-based, (default: disk
containing environment variable "SystemDrive" or "C:\" if
"SystemDrive" is not defined.)
Hide partition 0.
Hide partition 1.
Hide partition 2.
Hide partition 3.
Hide the service partition.
Hide the service partition by setting partition type to 12.
Display hard disk drive information (checks for 8 free
sectors).
Display hard disk drive information (checks for 16 free
sectors).
The Rescue and Recovery environment is located in the
service partition.
The Rescue and Recovery environment is located in the
C:\PARTITION (dual boot Windows and Windows PE).
The Rescue and Recovery environment is located in the
service partition with DOS (dual boot Windows PE and
DOS; Lenovo-branded preload Only).
Computer is not a Lenovo-branded computer. This forces a
second check for the F11 (default) key press after POST. This
may be required for older systems. This is also the default
setting for the OEM version of the Rescue and Recovery
program.
Used for installation program only to set a variable that the
Master boot record patch program can access.
Used for installation program only to install the Master boot
record patch.
Used for installation program only, to retrieve patch return
code.
System is an IBM branded or Lenovo-branded computer.
Silent.
Verbose.
Reboot computer.
Reset partition table entries in data sector.
Configure the boot manager to use the blue button on the
keyboard to enter the Predesktop Area.
Set the BIOS TOC location (16 characters that represent 8
bytes of data).
Show partition 0.
Show partition 1.