Lenovo ThinkCentre A62 Deployment Manual page 42

2. Sample command: RRUTIL /bs would display the backup space on the console.
As previously stated in this chapter, the rrutil.exe file enables you to GET files
from and PUT files into the Rescue and Recovery environment, it also allows
listing of files in the Rescue and Recovery environment and in the backups folder.
These procedures are used for all file customizations of the Rescue and Recovery
environment. The following procedures provide another example of how to utilize
the GET and PUT function with the Rescue and Recovery environment.
To use rrutil.exe, do the following:
1. Copy rrutil.exe to the root of the C drive.
2. Create getlist.txt file with the following syntax:
3. At a command prompt, type the rrutil.exe command and one of the switches
4. After you have performed the GET routine, you can then edit the file using a
Example: pdaguixx.ini
This example refers to pdaguixx.ini, which is a configuration file where you can
customize elements of the Rescue and Recovery environment (see "Customizing
the preboot environment" on page 36).
34
Rescue and Recovery 4.3 Deployment Guide
\preboot\usrintfc\file name
Save the file as c:\temp\getlist.txt.
defined in the following table. Then, complete the command with the
appropriate parameters, as shown in the following table.
Table 15. Command and switch options
Command and switch options
RRUTIL -l1
RRUTIL -l2
RRUTIL -l4
RRUTIL -g c:\temp\getlist.txt C:\temp
RRUTIL -d c:\temp\ dellist.txt
RRUTIL -p c:\temp
RRUTIL -r path \oldname.ext newname.ext
RRUTIL -r \temp\rr\test.txt test2.txt the file
is in the preboot\rr directory
RRUTIL -bp c:\temp
RRUTIL -bl path
RRUTIL -bl lists to c:\rr-list.txt
rrutil -bl c:\SWTOOLS
RRUTIL -bg c:\temp\bgetlist.txt C:\temp
RRUTIL -bs
standard text editor.
Result
List the contents of preboot directory.
List the contents of minint directory.
List the contents of the root of the C
drive or root of type 0x07 partition.
Get files from preboot partition.
Delete files from the preboot partition.
Add or replace files in the preboot
partition.
Rename a file in the Predesktop Area.
Update or replace files in RRBACKUPS
virtual partition.
List the RRBACKUPS directory.
Copy individual files from the
\RRBACKUPS.
Display space used by RRBackups
directory.