Invagent - Lenovo ThinkCentre A62 Deployment Manual

Table 24. (continued)
Parameters
/y
Note: The bmgr32.exe file must be in the same directory as the createsp.exe file,
and should be run from WinPE.

InvAgent

The InvAgent command can be found in C:\Program Files\Common
Files\Lenovo\InvAgent\IA.exe.
The IA.exe creates a local XML output file that it stores in the same folder.
One XML file will be created. The name of the XML file is created by combining
manufacturer, model-type, and serial number, for example, Lenovo-2373Q1U-
99MA4L7.XML.
The scanner can be run from a command-line by using the following
command-line syntax:
v -help
Show a short help message.
v -listsections
List all of the available sections of system information.
v -listtables
List all of the sections and the tables of system information.
v -silent
Run with no output to the screen.
v -section section1 sectiont2 ...
Return in the XML output file only the data from the specified section(s).
v -vpd
Only collect the vital product data.
v -leveln
Sections are grouped into levels; n=1 is the least amount of information, n=5 is
the most information.
v -query data.element.str
Returns the value of the specified data element.
v -register filename.ccd
Registers a custom collector DLL with the agent.
v -unregister filename.ccd
Removes a custom collector DLL from the registered list.
v -delete filename.ccd
Deletes the custom collector DLL and any associated files.
v -install
Run by an admin account to install any drivers needed for data collection.
Description
Suppresses confirmation of the drive being
cleaned. This parameter is optional.
Appendix A. Administrative tools
65