Lenovo ThinkCentre A62 Deployment Manual page 27

Table 9. General settings
Setting
Name
Organization
Time zone
The Network settings table provides the settings used to assign the computer
name, administrator password and the workgroup or domain of the destination
computer:
Table 10. Network settings
Setting
Computer name
Administrator password
Encrypted administrator
password
Workgroup
Domain
Domain administrator
Domain administrator
password
Advanced settings are used to define one or more commands that can be run the
first time a user logs on to his or her system.
Command line interface: The following executable supports a command line
interface for the Base Software Administrator program and is supported under
WinPE and the Windows environment:
TBSADMIN.EXE [/DEPLOY [/SILENT] [/BOOTSP=YES|NO]
[/MANIFEST="<path>"] [/PERSONALIZATION="<path>"]]
The following table provides the switches for the Base Software Administrator
program.
Table 11. Switches
Switch
/DEPLOY
Windows control file
keyword
FullName=
OrgName=
TimeZone=
Windows control file
keyword
ComputerName=
AdminPassword=
EncryptedAdminPassword=
JoinWorkgroup=
JoinDomain=
DomainAdmin=
DomainAdminPassword=
Description
Required to trigger a deploy. If /BOOTSP,
/MAN or /PER is also specified, the deploy
wizard is not displayed.
Description
Sets the user name for the
computer.
Sets the organization the
computer belongs to, such as
a specific department or
location.
Sets the time zone for the
computer.
Description
Sets the name for the
computer.
Sets the administrator
password.
Sets the encrypted
administrator password.
Sets the workgroup for the
computer.
Sets the domain for the
computer.
Sets the domain
administrator for the
computer.
Sets the domain
administrator password for
the computer.
Chapter 3. Configurations
19