The executable returns the following codes:
Backups
The following sections provide customization information for Rescue and Recovery
backups.
Scheduling backups and associated tasks
The scheduler is not designed to be specific to the Rescue and Recovery program;
however, the configuration is stored in the registry. When the Rescue and Recovery
program is installed, it will populate the scheduler with the appropriate settings.
Here is a description of the structure for the scheduler:
v Location: Install folder.
v Entry for each scheduled task.
v Script to run.
v Named pipe to be used for progress notifications. This is an optional setting.
v Schedule information monthly, weekly, daily, weekday, or weekend - multiple
v Parameters to pass to tasks.
For the Rescue and Recovery program, perform incremental backups on schedule,
with callbacks before and after the backup.
20
Rescue and Recovery 4.3 Deployment Guide
Table 11. Switches (continued)
Switch
/SILENT
/BOOTSP
Table 12. Return codes
Return code
0
1
2
3
4
5
6
schedules. Tuesdays and Fridays for example, can be supported by creating two
schedules.
Description
Suppresses any message boxes for error or
successful completion. (For return codes, the
following table.)
Takes an explicit Y or N value to indicate
whether the service partition should be set
active. For example, /BOOTSP=Y. A value of
N allows the adminitrator to reset the C:
partition active again, so recovery doesn't
automatically occur on next reboot.
Return message
Success
Unable to access service partition.
Error copying manifest file into service
partition
Error copying personalization file into
service partition
Error deleting file from service partition
Error writing AUTO.TAG file in service
partition
Error setting service partition active