Scenario 4 - Standalone Install For Cd Or Script Files; Scenario 5 - Working With Active Directory And Adm Files - Lenovo ThinkCentre A62 Deployment Manual

10. Run bootsect /nt52
11. Run BMGR32.EXE /Fbootmgr.bin /M1 /IBM /THINK
12. Use Imagex.exe to apply your WIM file to C:
13. Reboot
For more information about Windows 7, WIM files, or ImageX, see the following
Web site:
http://www.microsoft.com

Scenario 4 - Standalone install for CD or script files

For a standalone install for CD or script file, complete the following steps:
1. Use one batch file to silently install the Rescue and Recovery program.
2. Configure BIOS password recovery silently.

Scenario 5 - Working with Active Directory and ADM files

The following example illustrates how the Administrative Template file (.adm) can
be used locally and how the settings can be exported through a registry file and
then imported to all intended machines. This example documents how to hide the
Advanced menu in the main user interface.
10. Select Hide from the Advanced Menu dropdown box.
11. Click OK on the Advanced Menu Properties dialog box.
12. From the Windows Start menu, run regedit.
13. Right-click on the following registry key: HKLM\Software\Policies\Lenovo\
14. Click Export.
15. Type the file name in the File Name field on the Export Registry File dialog
7. Assign the drive letter (C)
8. Exit Diskpart
9. Format disk such as c: /fs:ntfs /q /y /v:WinXP
1. Install the Rescue and Recovery program on an image machine.
2. From the Windows Start menu, run gpedit.msc.
3. Right-click Administrative Templates under Computer Configuration.
4. Select Add/Remove Templates.
5. Click the Add button and then select the rnr.adm file. The rnr.adm file can be
obtained from the Lenovo ThinkVantage Technologies Administrator Tools
Web page at:
http://www.lenovo.com/support/site.wss/document.do?lndocid=TVAN-
ADMIN#rnr
6. Click the Close button on the Add/Remove Template dialog box.
7. Click the Administrative Templates tab under the Computer Configuration.
A new tab named ThinkVantage is presented. Under the ThinkVantage tab
there will be a Rescue and Recovery tab. All the available setting can be
configured now for this machine.
8. Go to ThinkVantage → Rescue and Recovery → User Interface → Menus, and
double click on the Advanced Menu tab.
9. Select Enabled on the Settings tab of the Advanced Menu Properties dialog
box.
Rescue and Recovery.
box.
57
Chapter 4. Best practices