Bmgr Clean - Lenovo ThinkCentre A62 Deployment Manual

v Prev Active Part
v Boot State
v Alt Boot Flag
v Previous Partition type
v Prior IBM MBR Index
v Patch IN: OUT
v F11 Msg
The following table provides error codes and error descriptions for BMGR32:

BMGR CLEAN

CleanMBR cleans the Master Boot Record. This program can be used when you
encounter a Rescue and Recovery installation failure, such as not being able to
install the Rescue and Recovery program with less than the required sectors free
for the boot manager to install.
Notes:
1. After running this tool, the applications that are using MBR will be useless. For
2. Run before installing the Rescue and Recovery program.
3. Use the cleanmbr.exe for DOS and the cleanmbr32.exe for Windows.
4. After running DOS CleanMBR, run FDISK /MBR; it will put on the MBR.
70
Rescue and Recovery 4.3 Deployment Guide
Displays the partition table index of the previously active partition when booted
to the service area.
Determines the current state of the machine:
– 0 – Boot normal to operating system.
– 1 – Boot to the service operating system
– 2 – Boot back to the normal operating system from the service operating
system.
Boot to alternate operating system; DOS for example.
Displays the partition type that the service partition was set to prior to booting
to it, when booted to the service area.
Used by Windows Installer.
Input and output values from the patch code if used.
Message to display to user if proper BIOS calls not supported.
Table 27. BMGR32 Error codes
Error code Error Description
5 Error applying selected options to master boot record.
6 Error installing the master boot record.
7 Error uninstalling the master boot record.
10 Error setting system type.
11 Error setting the master boot record mode.
13 Error installing compatibility patch.
14 Error setting compatibility patch parameters.
96 Error accessing sectors.
97 Error accessing sectors.
example: SafeGuard Easy, SafeBoot, and MBR version of Computrace.