NOTE:
Before saving files to the iPAQ File Store folder, it is a good idea to determine how much
memory is available in the folder. To view the amount of memory, tap Start > Settings > System >
Memory > Storage Card, and then select iPAQ File Store from the list.
HP iPAQ Ring Tone Manager
With HP iPAQ Ring Tone Manager application, you can add and remove ring tones on your HP iPAQ.
To add a ring tone:
1.
Tap Start > Settings > System > RingTones > Add.
2.
On the iPAQ Ring Tones screen, under Select Ring Tones to add to your device, all *.wav,
*.mid, and *.mp3 files stored on the device are displayed.
3.
Select the required ring tones, and tap Add.
To play the newly added ring tones, tap the
tone being played.
To remove a ring tone:
1.
Tap Start > Settings > System > RingTones > Remove.
2.
On the iPAQ Ring Tones screen, under Select Ring Tones to be removed from your device
list, select the required ring tones.
3.
Tap Remove.
NOTE:
You can use the HP iPAQ Ring Tone Manager application only to add and remove ring tones.
This application lacks the ability to assign any file as a current ring tone.
Manage certificates
To manage certificates:
1.
Tap Start > Settings > System > Certificates.
2.
Select a certificate tab.
●
The Personal tab displays your personal certificates.
●
The Intermediate tab displays the intermediate certification authorities.
●
The Root tab displays the root certification authorities.
NOTE:
iPAQ Audio
iPAQ Audio allows you to set, adjust, and save settings for the audio output and microphone.
To configure the audio output settings:
1.
Tap Start > Settings > System > iPAQ Audio > Audio out.
2.
Move the Bass Boost slider to make changes to the bass level and the Treble Adjustment slider
to adjust the treble effect.
3.
Tap Restore Default to switch to original settings.
92
Chapter 18 Applications
To view the certificate details, tap the required certificate on each tab.
(Play) button. Use the
(Stop) button, to stop the ring