Status Icons - HP iPAQ 610 - Business Navigator Product Manual

To locate the serial and model number:
1. Remove the battery cover.
2. Remove the battery from the unit.
3. Locate the label containing the product ID and serial number underneath the battery.
NOTE: Tap Start > Settings > System > HP Asset Viewer > Identity to view the serial number and
tap Start > Settings > System > HP Asset Viewer > System to view the model number on your
HP iPAQ. For more information, see

Status icons

The following table lists the common status indicators and their meanings.
Icon
10 Chapter 4 Set up your HP iPAQ
Status
Missed call
Voice call active
No SIM card installed
New Voice mail
Instant message received
Battery level low
Silent mode on
Ringer off
Wi-Fi on
Roaming
GPRS available in roaming
Enhanced Data Rates for GSM Evolution
(EDGE) available
EDGE in use
HP Asset Viewer on page
Icon
90.
Status
Call forwarding active
Call on hold
SIM card fault
New e-mail or SMS
Battery level
Battery charging
Sync error
Speaker phone on
Bluetooth
General Packet Radio Service (GPRS)
available
GPRS in use
EDGE available in roaming
Signal strength