21 Frequently Asked Questions; I Am Having Trouble Turning On My Hp Ipaq. What Should I Do; I Am Unable To Make Or Receive Calls. How Do I Fix This - HP iPAQ 610 - Business Navigator Product Manual

21 Frequently Asked Questions

I am having trouble turning on my HP iPAQ. What should I
do?
Your HP iPAQ seems to have problems with the battery. Please perform the following checks:
●
Is the battery charged? If the LED on your HP iPAQ is flashing red, it indicates a low battery charge.
For best results, charge the battery fully. The solid green LED display indicates full battery charge.
● Is the battery properly installed? Make sure the battery connectors on the battery are aligned with
the housing pins in the battery compartment. For more information, see
and replace the battery cover on page
● Are the battery connectors on the battery and housing pins in the battery compartment clean? If
these appear to be soiled, contact your dealer to get them cleaned.
●
Try charging your battery using the AC adapter. For more information, see
battery on page
●
Perform a hard reset on your HP iPAQ by pressing and holding the Power button and
simultaneously pressing and holding the Reset button. Make sure that you press and hold the
Power button before you press and hold the Reset button, and then turn on your HP iPAQ.

I am unable to make or receive calls. How do I fix this?

If you have problems making or receiving calls, please perform the following checks:
●
Is the reception of the network signal good? You might be located within closed boundaries. If yes,
move to an open space or closer to a window. For more information, see
signal strength on page
●
Is the network set up properly? If necessary, try to select your network manually. For more
information, see
●
Have you activated the Fixed Dialing, Call Forwarding, and Call Barring functions? If yes,
deactivate them temporarily.
● Are you using two SIM cards, one with the Enable SIM PIN function activated and the other with
the Enable SIM PIN function deactivated? If yes, deactivate the Enable SIM PIN function
temporarily. For more information, see
●
Is your HP iPAQ switched to the Flight mode? If yes, turn it off. For more information, refer
Wireless Manager on page
9.
25.
View available phone networks on page
69.

I am having trouble turning on my HP iPAQ. What should I do? 119

8.
28.
Change the SIM PIN on page
Step 2: Install the battery
Step 3: Charge the
Check connection and
26.
Use