Kyocera KM-4800w User Manual page 71

Network between Print Server and client is physically down.
Network between Print Server and client is logically down.
Network configuration of Print Server is not properly set.
Network configuration of client machine is not properly set.
As shown above. Check the following items.
(1) Check if network cable is connected properly. Confirm if network is physically correct.
Check if cables around hub and network support are connected properly, and check the
power source of them.
(2) Check if network service is proper. If those are connected properly, there is a possibility
that network service is not done properly. Remote Web Manager is working on the web
browser that is used TCP/IP protocol. Confirm to the network manager if TCP/IP of client
machine is properly set, such as installation of TCP/IP service, IP address of client
machine, gateway or masking of sub-net.
(3) Confirm if Web browser is used at Internet Explorer 6.0 SP1.
Remote Web Manager is confirmed its operation using Internet Explorer version 6.0 SP1
or later. When other browser than this is used, there is a possibility that indication is not
indicated properly.
70